Indicator Status - Epson WirelessHD User Manual

Indicator Status

Power (green) Link (orange)
(flashing slowly)
depending on
(flashes once)
(flashing
simultaneously) simultaneously)
(flashing
alternately)
Indicates
Power is off.
Starting up.
Started, but not yet communicating with the projector.
Power is on and the projector has been detected.
Power is on and communicating with the projector.
In power-saving status.
It enters power-saving status when no communication
occurs for a fixed time; however, communication
starts again when a signal is input.
- When you press the [Setup] button, the indicator
(varies flashes once and the projector is searched for again.
the status)
Initializing.
This occurs if the [Setup] button is pressed for five
seconds or more. When you release the button,
(flashing
initialization starts. When initialization is complete, the
indicators return to starting up status.
An error has occurred.
The internal temperature may be too high. Do not
install the transmitter in a poorly ventilated location.
(flashing
alternately)
: Lit/ : Flashing/ : Off
11 11