Fluid Supply Line; Fluid Outlet Line - Motorola Verizon moto g6 User Manual

E C B
F . 2. Vent exhaust air
IG

Fluid Supply Line

See F . 3 and F . 4, pages 10 and 11.
IG IG
1. Use grounded fluid supply lines (G). See
Grounding, page 7.
2. If the inlet fluid pressure to the pump is more
than 25% of the outlet working pressure, the
ball check valves will not close fast enough,
resulting in inefficient pump operation.
3. At inlet fluid pressures greater than 15 psi
(0.1 MPa, 1 bar), diaphragm life will be
shortened.
4. For maximum suction lift (wet and dry), see
Technical Data, page 22.
A
D

Fluid Outlet Line

See F
IG
1. Use grounded fluid hoses (L). See Ground-
ing, page 7.
2. Install a fluid drain valve (J) near the fluid
outlet.
3. Install a shutoff valve (K) in the fluid outlet
line.
Key:
A Air supply line
B Bleed-type master air valve
C Air regulator
D Air inlet
E Master air valve (for accessories)
F Air line filter
T Muffler
U Grounded air exhaust hose
V Container for remote air exhaust
U
. 3 and F . 4, pages 10 and 11.
IG
V
T
ti14219b
859.0088 9