Add Headset(S) To A Conference Call Without Docking - Jabra Engage 75 User Manual

Add headset(s) to a conference call
without docking
Up to three additional headsets can be
connected to one base, without the need to
dock the headsets.
1. Tap on the base to open the settings
menu, and navigate to Add headset.
2. Tap to switch to Pair without docking.
3. Tap to put the base into pairing mode.
4. Power off the additional headset by holding
the Call button for 4 seconds.
5. Put the additional headset into pairing mode
by holding the Call button for 5 seconds until
the status LED on the headset flashes blue.
6. A voice prompt will play in the primary
headset. Press the Call button on the
primary headset to accept the additional
headset, to the conference. The audio will
now be shared between headsets.
By default, the additional headset will be
muted.
Note: It is possible to use Jabra Engage 65 headsets for
conference calls.
33