Advertisement
Bundled item
Quantity
Mounting brackets
Mounting screws: M4 x 35mm (1.38")
Dust-/Water-proof packing
GT14 General Description (This manual)
1. Features
1) Improved monitoring performance and connectivity to FA devices
- Multiple languages are displayed using the Unicode2.1-compatible fonts
and beautiful characters are drawn using the TrueType and high quality
fonts.
- Two types of display modes are provided: 65536-colors display and
monochrome display.
In the monochrome display, 16 scales are used to improve the display.
A fine and beautiful full-color display which shows even small characters
clearly, is enabled by adopting the high intensity, wide viewing angle and
high definition TFT color LCD. (Also compatible with digital screen displays
with 65536 colors, BMP, etc.)
- High-speed monitoring through high-speed serial communication at 115.2
kbps maximum or through Ethernet connection.
- High speed display and high speed touch switch response.
2) More efficient GOT operations including screen design, startup, adjustment,
management and maintenance works
- The 9MB built-in flash memory is included as standard.
- SD card interface is included as standard.
- RS-232 interface is included as standard.
- RS-422/485 interface is included as standard.
- USB interface (host/device) are included as standard.
- Ethernet interface is included. (in some models)
3) Enhanced support of FA setup tools
- PLC program transfer and monitoring are possible via the personal
computer that is connected to the GOT if connected directly to the A, QnA,
L, Q, or FX series of the PLC CPU (FA transparent function).
2. Part Name
2.1 Front
4)
1) 2)
5) 6)
3)
No
Name
Specifications
Displays the utility screen and the user creation
screen.
GT1455-QTBD(E):320240 dots, TFT color liquid
crystal
GT1450-QMBD(E):320240 dots, TFT monochrome
1) Display screen
(white/black) liquid crystal, 16
scales
GT1450-QLBD(E):320240 dots, STN monochrome
(white/black) liquid crystal, 16
scales
For operating the touch switches in the utility screen
2) Touch panel
and the user creation screen
Lit in green: Power is correctly supplied
Lit in orange: Screen saving
3) POWER LED
Blinking in orange/green: Blown backlight bulb
Not lit: Power is not supplied
4) Logo label
Removable
USB interface for connecting a personal computer
(Device)
5) USB interface
O S i n s t a l l a t i o n , p r o j e c t d a t a d o w n l o a d , FA
transparent
USB environmental
6)
Opens/Closes when the USB interface is used.
protection cover
For the PC connection, refer to the following.
GT14 User's Manual
2.2 Back/Bottom
1)
4)
5)
7)
4
4
1
2)
1
11) 12)
3)
10)
17)
16)
No.
Name
Specifications
RS-232
For communicating with controller or personal computer
1)
interface
(D-sub 9-pin male)
RS-422/485
2)
For communicating with controller (D-sub 9-pin female)
interface
3)
USB interface
For data transfer, data storage USB interface (Host)
Hole for
preventing
Hole for fixing the USB cable with a cable tie (such as
4)
USB
Insulock) to prevent disconnection
cable
disconnection
Rating plate
5)
(nameplate)
SD card
6)
Interface for installing the SD card to GOT
interface
SD card
Lit: SD card accessed
7)
access LED
Not lit: SD card not accessed
Switch for prohibiting access to SD card before removing
SD card
the SD card from the GOT
8)
access switch
ON: SD card being accessed (SD card removal prohibited)
OFF: No access to SD card (SD card removal possible)
GT11-50BAT battery for storing clock data, alarm history
9)
Battery
and recipe data
Open or close when replacing the battery.
10)
Battery cover
Opened and closed when the terminating resistor is
changed over
Power terminal and FG terminal
11)
Power terminal
(for power supply (24VDC) to GOT and grounding)
Power terminal
Open or close when connecting a power terminal.
12)
cover
(Color: transparent)
13)
Reset switch
Hardware reset switch (Use an isolated rod to operate.)
Terminating
Terminating resistor selector switch of RS-422/485
14)
resistor
(330/OPEN/110)
selector switch
Ethernet
SD RD: Turns on in green during data communication,
15)
communication
100M:Turns on in green during 100Mbps transmission.
status LED
Ethernet
For connecting the equipment through Ethernet
16)
interface
(RJ-45 connector)
Hole for unit
Hole for the inserting installation fittings (accessory) during
17)
installation
the GOT installation to the panel
fitting
(4 holes at top and bottom)
For the connection to the controller (PLC, microcomputer board, bar code reader,
RFID, etc) or PC, refer to the following.
3. Specifications
8)
3.1 General Specifications
Battery cover opened
6)
Item
14)
Display section
Operating ambient
temperature
Other than display section 0 to 55C (When mounted horizontally), 0 to 50C (When mounted vertically)
9)
Storage ambient temperature
13)
Operating ambient humidity
Storage ambient humidity
15)
Vibration resistance
Shock resistance
Operating atmosphere
17)
*1
Operating altitude
Installation location
Overvoltage category
*2
Pollution degree
*3
Cooling method
*1 Do not use or store the GOT under pressure higher than the atmospheric pressure of altitude 0m (0ft.). Failure to observe this instruction may cause a malfunction.
When the air inside the control panel is purged by pressurization, the surface sheet may be lifted by high pressure. As a result, the touch panel may be difficult to press,
and the sheet may be peeled off.
*2 This indicates the section of the power supply to which the equipment is assumed to be connected between the public electrical power distribution network and the
machinery within the premises.
Category applies to equipment for which electrical power is supplied from fixed facilities.
The surge voltage withstand level for up to the raged voltage of 300 V is 2500 V.
*3 This index indicates the degree to which conductive material is generated in the environment where the equipment is used.
--
In pollution degree 2, only non-conductive pollution occurs but temporary conductivity may be produced due to condensation.
3.2 Performance Specifications
Item
Type
Screen size
Resolution
Display size
Display character
Display
Display color
section
*1
*2
Display angle
Contrast adjustment
Intensity of LCD only
Intensity adjustment
Life
Backlight
Life
Type
Key size
To u c h
N u m b e r o f p o i n t s t o u c h e d
*4
panel
simultaneously
Life
*5
C drive
Memory
Life (Number of write times) 100,000 times
D drive
Battery
Type
GT14 User's Manual
Backup target
Life
Specifications
0 to 50C
-20 to 60C
10 to 90% RH, non-condensing (STN liquid crystal type to be stored at or below 39C WBT.)
10 to 90% RH, non-condensing (STN liquid crystal type to be stored at or below 39C WBT.)
Frequency
Acceleration
5 to 8.4Hz
Under intermittent
Conforms to JIS
vibration
B3502 and
8.4 to 150Hz
9.8m/s
IEC61131-2
5 to 8.4Hz
Under continuous
vibration
8.4 to 150Hz
4.9m/s
Conforms to JIS B3502, IEC 61131-2 (147 m/s
2
, 3 times each in X, Y and Z directions)
Must be free of lamp black, corrosive gas, flammable gas, or excessive amount of electro conductive dust particles and
must be no direct sunlight. (Same as for saving)
2000 m (6562 ft) max.
Inside control panel
or less
2 or less
Self-cooling
Specifications
GT1455-QTBD(E)
GT1450-QMBD(E)
TFT monochrome (white/black)
TFT color liquid crystal
liquid crystal
5.7"
320 240 dots
W115(4.53) H86(3.39)[mm](inch) (Horizontal format)
16-dot standard font: 20 characters 15 lines, 12-dot standard font: 26 characters 20 lines
65536 colors
Monochrome (white/black), 16 scales
Left/Right: 80 degrees, Top: 80 degrees, Bottom: 60 degrees (Horizontal format)
--
2
2
400[cd/m
]
300[cd/m
]
8-level adjustment
Approx. 50,000h. (Time for display intensity to become 1/5 at operating ambient temperature of 25C)
LED (irreplaceable by a user) Backlight off/screen saving time can be set.
Approx. 70,000h or longer (Time for display intensity reaches 50% at the operating ambient temperature of 25C)
Analog resistive film touch panel
Minimum 2 2 dots (per key)
Simultaneous presses not allowed. (Only 1 point can be touched.)
1 million times or more (operating force 0.98N max.)
Flash memory (Internal), for storing project data (9Mbytes) and OS
SRAM (Internal), 512kbytes (battery backup)
GT11-50BAT lithium battery
Magnesium maganese dioxide lithium primary battery
Clock data, alarm history, recipe data, time action setting value, advanced alarm/advanced recipe, logging, hardcopy and
SRAM user area
Approx. 5 years (Operating ambient temperature of 25C)
Half-amplitude
Sweep Count
--
3.5mm
2
--
10 times each in X,
Y and Z directions
--
1.75mm
2
--
GT1450-QLBD(E)
STN monochrome (white/black)
liquid crystal
Left/Right: 45 degrees,
Top: 20 degrees,
Bottom: 40 degrees (Horizontal format)
32-level adjustmen
*3
Advertisement
