ALC AWS3155 Quick Start Manual

Secure the multi-position Loosen the T-Bolt on the camera
1 2
camera bracket to a stable bracket and adjust viewing angle
surface, ceiling or wall. using the Thumb Screw to rotate
position.
NOTE: Cameras are IP66 rated for indoor/outdoor use. For outdoor use it is
recommended to install camera under shelter to protect from direct exposure to
sunlight and other environmental elements. Avoid pointing a camera directly at any
bushes or tree branches or objects that may naturally move due to winds.
3 Align hole on bottom of camera 4 Attach power cable to power
with T-Bolt to install camera. extension cord AC Adapter.
Screw antenna into rear of camera. Plug into electrical outlet.
EXPANDABLE up to 4 cameras x3 x4
Wireless Made Simple.
Ask your retailer for accessory cameras (Models
AWSC35 and AWSC36 are compatible with this system).
BACK cover
FO LD
7" Touch Screen
Wireless
Surveillance System
Model AWS315
QUICK START GUIDE
Front cover
MONITOR SETUP
Internet Router (not included)
Included Ethernet Cable
AC power cable
1 Connect the AC/DC adapter to the power input on the rear of 3 The CAMERA(s) installed and plugged in will AUTOMATICALLY APPEAR
the Monitor and plug into an electrical outlet. on the Monitor, with or without Internet cable connected to a wireless
network router.
For remote viewing on smart devices, the Monitor must be connected
2 Extend the antenna. Press and hold the POWER button on the
to Internet. Plug one end of the provided Internet cable into back of
top of the monitor for 3-4 seconds until screen illuminates.
Monitor and the other end into an Ethernet port on router.
4 To prepare for RECORDING, insert the micro SD card provided
into the micro SD card slot on right side of the Monitor. Most SD
card brands are supported up to 32 GB. The SD Card status icon on
Monitor will indicate proper installation.
ANDROID REMOTE VIEWING
IMPORTANT: Please complete the setup before mounting; please be in close range with the camera while setting up.
ANDROID DEVICE SETUP
1 From your Android device, DOWNLOAD and INSTALL
the free ALC Observer App.
2
Connect as shown in the Monitor section, above.
Turn on the Wi-Fi setting on your Android device and set it to
3
your home network.
4 Tap Set Up Wizard on screen for direct wireless
connection of camera to App.
5
The App will start the connection process. Tap Live View.
FREE APP DOWNLOAD
NOTE: Screen shots and icons may vary due to continuous updates to App and software development.
NOTE: If you are having a difficult time connecting your smart device for remote viewing, please visit
www.ALCWireless.com/support to view the latest guides.
RECORDING FROM SMART DEVICE + MONITOR
MOTION RECORDING FROM SMART DEVICE
FROM MONITOR
1 From Pop-Up menu, tap the following icons 1 SNAPSHOTS: From LIVE VIEW , tap SNAPSHOT Icon
capture screen images from camera selected. Snapshots will be
saved to camera roll of your mobile device.
2
RECORDING: Tap RECORD icon
2
Tap the camera's Sensitivity to OFF, LOW or HIGH. system's SD Card.
System 1 (Live Video)
Connected
640x480
P2P, No1, 12.67FPS
LIVE VIEW
3
To set up EMAIL ALERT, tap the following icons from the pop-up menu,
fill in the information fields and tap OK to save,
then < to return to the previous screen.
Tap on the SMTP Server field. Enter smtp.gmail.com
Tap SMTP Port: Enter 465
Tap USERNAME: Enter your Gmail username.
Tap PASSWORD: Enter your Gmail password.
EMAIL TO: Enter the email address you want the alerts to go
to. (This can be different than the SMTP outgoing email account.)
NOTE: Do not submerge in water or use monitor near water. STRANGULATION HAZARD: Infants have STRANGLED in power cords. For detailed installation and setup, please refer to the Model
Keep power cords more than 3 feet away from cribs. When using your equipment, always follow basic safety precautions to reduce
AWS3155/AWS315 complete User's Guide available on our
the risk of fire, electric shock and injury to persons. Illustrations are for reference only. Actual product specifications may vary.
website: www.ALCWireless.com/support
For additional precautions and product information, please see owner's manual at www.ALCWireless.com/support
Wireless
Made Simple.
ALCWireless.com
On-screen Display
SD Card Internet Connection Recording Camera Number
Status status Status Signal Status
APPLE REMOTE VIEWING
APPLE DEVICE SETUP
1 From your Apple device, DOWNLOAD and INSTALL
the free ALC Observer App.
2
Connect as shown in the Monitor section, above.
3 Tap Set Up Wizard on screen for direct wireless
connection of camera to App.
4
The App will start the connection process.
5 Once the screen indicates the camera is connected, tap
Live View.
FREE APP DOWNLOAD
PAIRING ADDITIONAL
CAMERAS TO MONITOR
The Wireless Surveillance System supports up to four (4)
wireless surveillance cameras. Use the following steps to pair
each additional camera.
to
to save video to the
Camera In-line
AC power cable
Pairing Button
From the Main Menu on the Monitor, select the
CAMERA SET UP icon
Select camera
station to
be paired
Tap the CAMERA STATION you want to pair;
a 60-second timer will start.
2 Within 60 seconds, press the PAIRING KEY once on the camera's
power cord. The timer will stop when the camera is paired.
3
Go to Home Screen to view live cameras on the Monitor.
SCAN
TO VIEW
COMPLETE
USER'S GUIDE