Reasnow CrossHair Quick Start Manual

Quick-Start-Guide
A. Check the conditions
● Game console is needed (such as PS4/PS3/XBOX ONE/
XBOX 360).
● Genuine controller for the game console.
● Keyboard,mouse (2000 DPI and above is recommended,
should be configured on PC first) , joystick or other controller
you wish to use.
B. Simple set up steps
Step 1: Connect to PC (PC MODE)
● Please connect your Cross Hair according to the figure
above, using the USB cable included in the package.
sure that there is no controller, keyboard, mouse, joystick
or anything else plugged into it. And when Cross Hair
LOGO is white, it enters into PC MODE , and can then be
configured on PC.
Step 2: Run Cross Hair Manager (Windows OS only)
Run Cross Hair Manager which can be downloaded from
http://www.reasnow.com (
Step 3: Choose console and game
● Choose the game console you are going to use by clicking on
the right arrow button
● If there is already a configuration of the game you want to play,
choose the configuration and click on the "Edit" button, this is the
fastest way.
● If there is no existing suitable configuration, just click on the
"New" button to add a new configuration. Make any changes as
you see fit.
● If the game you want to play do not exist, just choose the
"custom game". This setting has the highest possibility of
working, as most games are not varied very much from each
other.
● Remember to mark the configuration most frequently used as
"Start Up". Click the configuration first then click on the "Start Up"
button.
Make
Step 4: Edit Configuration
For convenience, you can use the default settings, but should
remember the keys' mapping, while advanced users can choose
their favorite settings.
Please choose the latest version)
Step 5: Save and Exit
You should save the configuration first, before exiting
Manager, and after that, unplug the Cross Hair from PC.
Changes you made will not be saved in you Cross Hair
until you have clicked on the "Save" button.
C Things to do before playing
1. Mouse DPI (CPI)
Make sure the mouse you are using is configured at its
highest DPI, or you should connect it to a PC, and use
some software from the producer to change the DPI to
maximum.
2. Mouse Report Rate
Set your mouse USB polling rate to either 500 or 1000.
3. Save to On-Board Memory
Some mice have on-board memory to store DPI and other
settings, please remember to save all these in On-Board
Memory.
Some mice have no on-board memory, but their DPI can
be adjusted, so you need to set their DPI to maximum
every time powered on.
If you have a mouse which can not be configured,just skip
1-3.