Advanced Panel; Use Cases; Support - Wavesfactory TRACKSPACER User Manual

ADVANCED PANEL

In the advanced panel you can find a set of parameters for a better audio control.
‣
Pan: controls the panorama of the effect. In L/R mode you can set the effect to the left or to the
right or anything in between. In M/S mode you can set the effect to the mid channel or the sides
channel or anything in between.
‣
L/R - M/S: Selects the processing mode to regular stereo (L/R) or to mid / sides (M/S).
‣
Attack: Sets how quickly the gain reduction reacts to changes in the input signal level.
‣
Release: Sets how fast the gain reduction.
‣
Side-chain: When activating this button you'll hear the side chain signal with the Low-Cut and
High-Cut filter applied for a better fine-tuning.

USE CASES

‣
Make space for a vocal in a wall of electric guitars and synths.
‣
Make space for the kick drum in a heavy low-end mix.
‣
Snare low-end cutting-through the lower-mids.
‣
Voice-over on top of the background music in a more musical way than having a full-band
compressor.
‣
You name it!

SUPPORT

If you find any bug or you have any questions please get in contact with us following this link:
https://www.wavesfactory.com/support
Wavesfactory Trackspacer Page 8