Authorization; About Sidechaining - Wavesfactory TRACKSPACER User Manual

AUTHORIZATION

When purchasing Trackspacer from Wavesfactory you'll receive an e-mail immediately containing
the serial number. This will be formatted like this:
You have to copy this to the clipboard by selecting it and either
‣
Right-click and select "copy".
‣
Press ctrl+C on Windows or cmd+C on Mac.
Make sure that you copy them without empty spaces as it will result in a not valid authorisation.
Then open the plug-in and the authorisation panel will appear. Insert your username (e-mail address)
and serial. Press "paste" and the contents of the clipboard will be copied accordingly. Finally, press
the Activate button. If the information is correct he plug-in will save your serial number in
Wavesfactory/Trackspacer/License/. If the information is not correct the panel won't disappear and
the version will still be in demo mode.
In order to de-authorise you can simply delete the file inside Wavesfactory/Trackspacer/License.

ABOUT SIDECHAINING

Side-chaining is a production technique used in a wide variety of music genres where an effect is
activated by an audio track different to the one that the effect is inserted in. In other words, an audio
effect uses an alternative audio source to trigger a processor.
It's very commonly used in EDM to create a pumping effect on a bass or pad by putting a
compressor in side-chain mode listening to the kick and lowering the volume of the pad every time
the kick hits.
There seems to be a little bit on confusion on how to effectively set up Trackspacer in your DAW, so
here you have a selection of online tutorials (mainly from YouTube) on how to do side-chaining in all
major DAWs. If a link is down please report it here: https://www.wavesfactory.com/contact
Wavesfactory Trackspacer
Serial: XXXX-XXXX-XXXX-XXXX-XXXX
Page 5