Download Print this page

Specifications; System Requirements - ION Air Pro WIFI Quick Start Quide

Hd sports video camera
Hide thumbs Also See for Air Pro WIFI:

Advertisement

5. Sign Up for Free ion Cloud Storage
You can sign up for 8GB of free Cloud storage for storing and sharing of video
and photo content. Enter www.iontheaction.com/ioncloud to activate this
service..
6
Connecting Your Camera to a TV/HDTV
.
You can connect your camera to a TV or HDTV via the Composite RGB (included)
or an HDMI cable (not included). Once you are connected you can:
1. Take photos or videos by using your TV as a viewfinder
2. Playback any photo or video files saved in the camera
3. Delete any files saved in the camera
4. Format the MicroSD Card
7. Troubleshooting
Problems
Causes
1. LED flashes and
camera turns off
Battery is depleted
2. Cannot turn on the iON
camera
Red LED flashes during
Low battery
recording
Cannot take photos or
video (Green LED
Memory full
flashes)
1. Micro SD card is not
Cannot take photos or
properly inserted
video (Green and Red
LED flashes alternatively)
2. Micro SD card has not
been formatted properly.
Cannot find removable
disk or device after
Connection failure.
connecting the camera to
by USB
a computer
Camera behaving oddly
Firmware Configuration
and not as described in
Issue.
the documentation.

8. Specifications

Sensor
Lens
Focus range
Video
Photo
Audio
Storage
Solutions
Recharge the camera
Connection
Power
Recharge the camera
Housing
Replace with a memory card
with space available for
Dimension
contents
Weight
1. Insert an SD card. Press in
to lock in place. To release a
* Settings can be changed through ion software
card press in to unlock and
card will pop up,
2. Format the Micro SD card
1. Make sure all cable

9. System Requirements

connections are secure.
2. Disconnect the camera,
power cycle and reconnect.
Operating System
3. Try a different USB port
on the computer
CPU
4. Restart the computer
RAM
Interface
Press the Reset button on the
CD
back of the camera.
Mobile WiFi OS
5 Mega pixel CMOS sensor
170º ultra wide angle field of view
0.5m - ∞
1080p: 1920x1080 pixels (16:9), 30 fps
960P*: 1280x960 pixels (4:3), 30 fps
720p: 1280x720 pixels (16:9), 60 fps
720p *: 1280x720 pixels (16:9), 30 fps
Format: H.264 compression, saved as MPEG4 (.mp4) file
Dual Video files for easy sharing
Resolution: 5 Mega Pixel in JPEG format
Capture Modes: Single, Burst-shot*, Time lapse*
Built-in high quality microphone
AAC Compression, Automatic Gain Control
Micro SD/Micro SDHC with minimum Class 6 up to 32GB (not
included)
Average Recording Times: about 4 hours (using 32GB mSD card in
1080p30/720p60)
USB2.0 (for data connection and battery charging)
HDMI
AV / Composite
Build-in 1200 mAh Rechargeable Li-Polymer Battery
Battery Life: Approx. 2.5 hrs / 1 hr (w/ WiFi)
High quality Aluminum barrel and rubberized finishing
Depth up to 30 feet / 10 meters
40 x 40 x 108 mm
~130g/4.58oz (w/ PODZ), ~136g/4.79oz (w/ WiFI PODZ)
Mac 10.5.x or higher, Windows® 7/XP SP3/Vista required for
Software Application use
Pentium III or above
At least 64MB
(for data connection and battery charging)
USB 2.0 port
4x speed CD ROM or above
iOS V 5.1 required for App use
IMPORTANT
Keep the lens clean. Dirt and fingerprints will affect the quality of the
picture.
Close the PODZ properly to prevent leaks. Do not open it under
water.
Rinse the camera with clean water after used and keep it dry for
storage.
Refer to additional operating instructions in the user manual
TRADEMARK INFORMATION
© 2012 World Wide Licenses Limited.
® The ion logo is a registered trademark of World Wide Licenses
Limited.
CamLOCK, PODZ, Shoot/Share and AIR PRO and their respective
logos are trademarks or registered trademarks of World Wide
Licenses Limited in the United States and other
countries. Copyright © 2012. All Rights Reserved.
FCC Statement
Caution Statement
"Modifications not approved by the party responsible for compliance could void the user's
authority to operate the equipment."
Instruction Statement
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/ TV technician for help.
WARNING: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV
INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THE DEVICE. ANY
SUCH MODIFICATIONS COULD VOID THE USER'S AUTHORITY TO OPERATE THE
EQUIPMENT.
For EU only
Document V1.3.6
Questions?
Need Some
If you still have
questions, call our help
Help?
line 855-411-4466
This manual
or visit our website:
should help you
www.iontheaction.com
understand your
new product.
Like Us:
www.facebook.com/iontheaction
Tweet Us:
www.twitter.com/iontheaction

Advertisement

loading