Advertisement
Blade Pro: Step-By-Step Installation
acdc xxx
acdcxxx/10m
acdc xxx/20m
acdc xxx/50m
Flanged
end cap
5
Blade Pro Installation Instructions: Helpline +44 (0) 845 862 6400.
8. Remoter driver installation.
IP20 driver suitable for dry location only.
See wiring table on pg. 6.
*Product placement
9. Check luminaires are working
Turn the power on and check that luminaires are fully
functional before placing in the ground sleeve.
Flanged
end cap
10. Place luminaire into the ground sleeve.
If flanged end caps are required install these now as
shown.
Carefully place the luminaire into the sleeve ensuring
that the clip fittings click into place.
11. Ground removal.
To remove the luminaire use the provided tool in
the recess locations as shown and lift the unit out
with care.
INS211 Rev.2. 25.05.2018
Advertisement
