GhostBed Foundation TWIN XL Assembly Instructions

GhostBed • 7143 West Broward Blvd
Plantation, FL 33317 • 855-855-4499
Please Note:
· The Foundation is to be assembled on a hard flat surface
· It is recommended that two people are available for assembly
Phillips screw driver is required for assembly
Supplied Hardware
60 - Wood Screws for Slats and Top &
Bottom Rails (includes 4 extra screws)
Please visit WWW.GhostBed.com for product
information and video instructions.
>Limited 3 year warranty visit
WWW.GhostBed.com to view
and register warranty
>Compliant with CPSC FR1633
Knock Down Mattress Foundation (Boxspring)
Assembly Instructions
(KD-Foundation®)
· Wood is a natural product. If there are visual discolorations, knots
· or even minor cracks this will not adversely affect the foundation
· use or durability.
1.
Identify components.
Left Side Frame
The top can be identified by the 1
inch wide rib.
The outside can be identified by
the rounded corner.
Center Frame
The top can be identified
by the flat top that travels
the length of the frame.
Twin and Twin Long
foundations do not use
center frames.
Fabric Cover
Screws
Made in USA
Continue with step 2 on the other side of this sheet.
· Be aware of rough or sharp edges, use care during assembly
· Please follow steps in order for best results
Top Slat Bundle (2 sets)
Each set contains 1 top cross
rail and 6 top slats. The top
cross rail and slats are evenly
spaced and connected with
The top can be identified by the 1
The outside can be identified by
Bottom Cross Rails
fabric strips.
Right Side Frame
inch wide rib.
the rounded corner.