Episode EA-MR-SSVC-6 Owner's Manual

SETTING THE EA-MR-SSVC-6 VOLUME CONTROLS
This procedure will allow you to properly set the volume of your system to avoid overdriving
the EA-MR-SSVC-6 and/or any connected speakers, and to avoid damage or amplifier distortion (clipping).
1. Set receiver's volume control to the minimum setting.
2. Turn each volume control on the EA-MR-SSVC-6 to its maximum setting.
3. Slowly turn the volume up on the receiver until the best maximum volume without distortion
is achieved. Volume can be individually adjusted in any zone that's connected to the EA-MR-SSVC-6.
4. The volume of each room can now be individually attenuated to achieve the proper listening
level in each room.
SPECIFICATIONS
2-1/8˝ (54mm) H x 16-3/4˝ (425mm) W x 10-1/4˝ (260mm) D
Overall Dimensions (Depth includes speaker connectors & volume control knobs;
height includes feet)
Maximum Number of
6 pairs @ 4 ohm minimum
Speaker Connections
Minimum Amplifier
5.3 ohm w/ 8 ohm speakers connected, 4.6 ohm w/ 4 ohm
Impedance with All Rooms
speakers connected
Selected at Full Volume Each
Power Handling 100 W/CH continuous, 200 W/CH Music Power (Peak)
Weight 11 lbs
Removable screw-down connectors, hot-stamped with left and right
Connection Type
polarity, accepts 12 AWG to 18 AWG speaker wire. 16AWG recommended
Lifetime Limited Warranty
All Episode Speakers Selectors have a Lifetime Limited Warranty. This warranty includes parts and labor
Lifetime
repairs on all components found to be defective in material or workmanship under normal conditions of
use. This warranty shall not apply to products which have been abused, modified or disassembled.
Products to be repaired under this warranty must be returned to SnapAV or a designated service
center with prior notification and an assigned return authorization number (RA).
OWNER'S MANUAL
EA-MR-SSVC-6
100917
Speaker Selector
>>