Advertisement
Headphone Functions
1. Bluetooth stereo headphone function
2. MP3 playing function with SD card.
(Make sure a compatible SD card is connected)
3. FM radio
4. Stereo wired headphone function by connecting to an external device.
(Aux 3.5mm connection cable required)
Layout
1.
Power ON/OFF switch
2.
Charging indicator
3.
USB port
4.
Power indicator
5.
BT/Card/FM Mode button
6.
PRE button
7
.MFB (Multi-Function Button)
11
12
8.
NEXT button
8
9.
SD slot
10. Volume control
11. Audio in/out jack
12. MIC
4
9
Headphone Use
Bluetooth stereo headphone function
Pairing the headset with Bluetooth devices:
Switch the headphones on, the power indicator blinks red and green lights
alternately. The headphones are now in pairing mode, ready to connect.
Pairing the headset with a Bluetooth mobile phone:
Make sure your mobile phone has Bluetooth compatibility with the
headphones. Specific pair procedures are not the same with different mobile
phones. Refer to your mobile phone manual for further information.
General Pairing steps are as follows:
a) Keep the headset and your mobile phone in the range of 1 meter
9
when pairing.
b) Start the Bluetooth function of mobile phone and search the
Bluetooth devices.
c) Switch the headphone on.
After searched, select "PHPMP39" in the Bluetooth device list. After pairing,
10
the power indicator blinks twice with a 'beep' tone, then the light blinks green.
7
(You may be required to enter a password, depending on your device,
pairing password code is "0000" for some mobile phone.
6
3
1
2
Playing music:
5
When the headphones are connected with a mobile phone or a Bluetooth
transmitter which supports A2DP, you can enjoy music through the
headphoens wirelessly. Reference "MP3 playing function notes: 3 & 4" on the
next page for more information.
*The headphones will power off in 5 minutes after B/T disconnection.
Making calls with the headset:
Function
Status of headset
Press the MFB twice quickly.
Voice dial*
Standby mode
Redial last
Standby mode
Press and hold MFB for 1 second.
number
Volume up
Conversation mode Turn the volume control.
or down
Press MFB.
Answer calling Ringing
Press MFB.
Hang up calling Conversation
Press PRE or NEXT to change between
Switchover
Conversation
the headset mode and cell phone mode.
Reject calling
Ringing
Press and hold MFB for 1 second.
* The voice dial list should be pre-stored in your mobile phone.
(This feature is not compatible with all devices)
MP3 playing function
1. Connect an SD card with songs into the SD card slot into the headphones.
The SD card can be taken out by gently pushing the SD card once more.
2. Switch on the power. The indicator will shine. Now the headphone
mode. Press the BT/Card/FM
comes into
Bluetooth
change to the
Card
state, the power indicator blinks red.
3.
Adjust the volume, p
ress the PRE/NEXT button to select different
songs. Press the MFB button to play or pause the selected song.
4.Press the BT/Card/FM button to exchange between the
FM radio modes. If no card is plugged in, the headset
Card playing and
remains in the
Bluetooth or FM radio mode.
Operation
button one time to
Bluetooth
,
Advertisement
