AEG RCB74711NW User Manual page 10

10
www.aeg.com
Crisper and Humidity control
The crisper, mounted on telescopic
extension slides, is for storing vegetables
and fruits. You can adjust the humidity
inside by using the sliding block.
• The sliding block on crisper cover can
slide to left or right and the air hole
become more or less relatively. More
air hole opening means less humidity
and less means more humidity.
• We recommend that you store vegeta-
bles with more humidity and fruit less
humidity.
• When you remove the crisper, pull
them forward, then lift the crisper off
the slides. Remember to empty food
in the crisper firstly. Once you have re-
moved the drawers, ensure the slides
are pushed back fully.
• Divider easily manage crisper space as
you store separate food.
Using your freezer chamber
The freezer chamber is suitable for stor-
age of foods required to be frozen, such
as meat, ice cream and others.
CAUTION!
Never close the freezer door while
the drawers, installation bracket,
ice tray, and/or telescopic slides
are extended. It may damage both
them and the refrigerator.
• Ensure that drink bottles are not left
in the freezer as freezing liquid may
cause the bottle to break.
161124_RCB74711NW_RCB74711NX_Refrigerator_Instruction_EN_EL_PL_TR_AEG_M.indd 10
Crisper cover
Humidity control
Divider
Crisper
Installation bracket
The installation bracket is located under
the top of the freezer chamber. In order
to get more space in the freezer, you can
remove the installation bracket.
• When removing the bracket, you can
pull out the twistable ice tray and the
upper freezer drawer, lift both the two
catches on the left and right underside,
and pull it forward until the bracket
break from the three circular attach-
ments. Then you should bend it at one
side, slip it from the guide and finish
removing the bracket.
Twistable ice tray
The twistable ice tray is used to make
and deposit ice cubes. You should use it
as follows.
1. Pull out the twistable ice tray from the
installation bracket.
2. Fill the drinking water inside (do not fill
above the max water level).
3. Place the filled ice tray back to the
bracket.
4. Await for around 3 hours, twist the
knobs clockwise and the ice will drop
into the ice box below.
Installation bracket
Ice box
Twist ice tray
Catch
Middle freezer drawer
2017-05-23 08:46:31