When A Blank Screen Is Displayed (Digital) - Samsung P2250(G) Service Manual

4-4. When a blank screen is displayed (Digital)

Symptom - Even though the LED power turns on, the screen is blank when connecting the DVI cable.
- Even though the LED power turns on, the screen is blank when connecting the DVI cable.
- Check the DVI cable connections.
Major checkpoints
- Check whether the LVDS cable is connected correctly to the panel.
- Check whether the lamp connector of the panel is connected correctly to the IP board.
Diagnostics
Do output signals appear at pins 8 to 30
Can DC 5V be measured at pins 1, 2,
Caution Make sure to disconnect the power before working on the IP board.
Check the signal cables and
their connections.
Yes
1 Is X201 oscillating correctly?
Yes
2 Do the inputs appear at R100,
R101, R103, and R107?
Yes
of CN400?
Yes
and 3 of CN400?
Yes
Check and replace the panel.
CN400
X201
IC200
R100,R101,R103,R107
Check and replace the circuits
No
Check the R100, R101, R103,
No
Check the circuits related to
No
No
4. Troubleshooting
related to X201.
and R107 input terminals.
CN400
Check the Panel EN signal
and the BL_EN signal.
4-7