Page 4
Find the arrow printed on the top of the damping plate, which indicates the correct direction for installation. Step 2. Slide the E50 in the indicated direction all the way into the mounting slot, until the E50 is secured by the locking clip.
Page 5
Action Step 3. Not Connected Tap the serial number of the E50 when the following window pops up. (If multiple Yuneec UAS are used, Select Vehicle to Connect NO CAMERA check the ID number on the side of each camera to Takeoff assure correct camera selection/binding).
Page 6
Yuneec. We may also collect information which user send to other users, and the recipients and senders of such information.
Page 7
Disclaimer Yuneec Electric Aviation cannot be held liable for any damage, injury or for use of the product in violation with legal regulations, especially in the following circumstances: Damage and/or injury as well violation of legal regulations resulting from a failure to comply with the operating instructions or the instructions at www.yuneec.com, product information, user manual and other legally binding information.
Damage and/or injury as well as violation of legal regulations caused by flying in legally defined no-fly zones. Further losses which do not fall within the scope of use defined by Yuneec Electric Aviation as improper. This product is designed for both professional use and personal, private use. The national and international laws and regulations in force as the time of taking off must be adhered to.
Page 9
5G Wifi: 5560-5580MHz (27dBm), 5680-5700MHz (27dBm) EU Compliance Statement Hereby, Yuneec International (China) Co., Ltd. declares that this device is in compliance with the essential requirements and other relevant provisions of the RED Directive 2014/53/EU. The full text of the EU Declaration of Conformity is available at the following internet address: http://yune.ec/de-downloads.