Appendix 1 Default Radio Configuration; Appendix 2 Voice Messages - Pentax G6 User Manual

Appendix 1 Default radio configuration

The frequency and protocol of the 8 channels could be modified via Web UI or
controller. So you could change it easily. And the Frequency range is from 410MHz to
470MHz, so you can elect as you want.
Channel
1
2
3
4
5
6
7
8

Appendix 2 Voice messages

No. Voice messages
Rover
1
2 Base
3 Static
4 Single
5 RTD
6 Float
7 Fixed
8 OK
9 Power off
10 Start record
Frequency
441.00MHz
442.00MHz
443.00MHz
444.00MHz
445.00MHz
446.00MHz
447.00MHz
448.00MHz
It will broadcast "rover" if the current Working mode is rover.
It will broadcast "base" if the current Working mode is base.
It will broadcast "static" if the current Working mode is static.
It will broadcast when the Solution change to single.
It will broadcast when the Solution change to RTD.
It will broadcast when the Solution change to Float.
It will broadcast when the Solution change to fixed.
It will broadcast when the self-check successful.
It will broadcast when power off the receiver.
It will broadcast when receiver start record data in static.
Protocol
Trimtalk 450S
Trimtalk 450S
Trimtalk 450S
Trimtalk 450S
Trimtalk 450S
Trimtalk 450S
Trimtalk 450S
Trimtalk 450S
Description
34