Table of Contents
Advertisement
Figure 12: Properly Hung Prespray Hose
Figure 13: Spotting Carpet
Jet Spray
Push Button
Indicator
Light
Jet Spray
Toggle Switch
Figure 14: Control Panel
Upward lift
with hands ...
... creates downward force
on the vacuum shoe.
Figure 15: Positioning Machine
for Cleaning Pass
Four or five
coils on
holster.
Spray wand
positioned
behind handle.
Spotting Bottle
Defoamer
Push Button
Vacuum
Toggle Switch
-4-
It remains ON during the entire ex-
traction process.
• Defoamer Push Button Switch: This
switch will be used on an "as needed"
basis during the extraction process.
• Jet Spray Switches: For your conve-
nience, there are two jet spray
switches. One is a toggle switch and
the other is a push button. Use the one
that is most comfortable for you. The
indicator light will light up whenever
either one of these switches are acti-
vated. These switches control the
water flow to the carpet.
B. Cleaning Carpet
1. Turn vacuum switch ON.
2. Position machine for a cleaning
pass (figure 15).
3. Make a cleaning pass (figure 16).
Turn jet spray switch ON and
walk machine backwards. Apply
enough upward lift on the handle
to keep the nose of the machine
firmly on the carpet.
4. At the end of your cleaning pass, turn
jet spray switch OFF and continue
walking machine backwards a few
inches. This allows the machine to
pick up any excess moisture.
5. Reposition machine for your next
cleaning pass (overlap approxi-
mately 2-3 inches) and repeat
steps 3 and 4.
6. During your cleaning pass, if you
notice a lot of soap residue in
your view windows, push the de-
foamer button for one second. If
you ever hear the RPM's of your
vacuum motor decrease, immedi-
ately push the defoamer button.
IMPORTANT:
tremendous amounts of soap residues in
them. This machine is very efficient at
Many carpets have
Advertisement
Table of Contents
