Software Installation - Extech Instruments RHT20 User Manual

Software Installation

1. Place the CD in the drive and then follow the on-screen installation
instruction.
2. After the software is installed, keep the CD in the drive and connect the
datalogger to the PC by the USB cable.
3. A USB Driver installation window will pop-up. Follow the directions to
install the driver.
Software application
The Datalogger USB software is a program for collecting data from the DATA
LOGGER when it is connected to a PC or notebook computer. The data may
be displayed graphically, as Excel or similar programs. The major functions are
all listed in the main window.
System Requirements
Windows 2000 or Windows XP or Vista
Minimum Hardware Requirements:
PC or NoteBook with Pentium 90MHz or higher, 32 MB RAM ;
At least 7 MB byte hard disk space available to install HT Datalogger USB
software.
Recommended display resolution 1024X768 with High Color(16 bit).
Software Operation
The Software operation is described in the HELP file .
Calibration and Repair Services
Extech offers repair and calibration services for the products we sell.
Extech also provides NIST certification for most products. Call the Customer
Care Department for information on calibration services available for this
product. Extech recommends that annual calibrations be performed to verify
meter performance and accuracy.
Support line (781) 890-7440
Technical Support: Extension 200; E-mail: support@extech.com
Repair & Returns: Extension 210; E-mail: repair@extech.com
Product specifications subject to change without notice
For the latest version of this User Guide, Software updates, and other
up-to-the-minute product information, visit our website: www.extech.com
Extech Instruments Corporation, 285 Bear Hill Road, Waltham, MA 02451
RHT20 V1.0 8/09
5
www.burntec.com