DAMSON S-CUBE User Manual page 3

S-Cube has three primary functions:
1. Individual
Stereo Speaker
1
Power on and change mode
to either BT (Blue LED) or
2
AUX
DC
Insert a cable into the AUX
port for wired connectoin.
The LED will light up yellow.
3
If selecting BT pair your
device to Damson
S-Cube. Function mode
should be set to Circle
2. Multi Speaker
1
Select a primary speaker to
connect to your device to
S-Cube. Power on additional
speakers and change
function to JetStreamNet
mode (light blue LED).
2
short press short press
DC
Speaker 1 Speaker 2
Bring the additional speakers close to the primary speaker
and short press and hold the JSN Pairing button on
both speakers at the same time. Speakers are now
connected. Repeat for up to 16 speakers.
3
DC
Change the output of each speaker. Select Triangle for
Stereo left channel and Square for Stereo Right channel,
or circle on each device if you wish to play stereo on each
speaker.
3. S-Series Surround - Establishing a
connection and reconnecting
1
Power
Power On the
S-Woofer with remote
3
DC
Short press the Pairing button on the S-Cube and
the JSN button on the remote control at the same
4
On the left surround
speaker change the output
switch to
2
Mute
XBASS
Change the mode
on the S-Cubes to
control. JetStreamNet (light blue).
short press
Volume Pair
DC
Previous Next
time, pressing for less than 3 seconds.
5
On the right surround
speaker change the output
triangle. switch to square.