Table of Contents
Advertisement
Deleting a RAID set
Be cautious when deleting a RAID set. You will lose all data on the hard disk drives when
you delete a RAID set.
To delete a RAID set:
1.
From the utility main menu, select 2. Delete RAID Volume and press <Enter>. The
following screen appears:
Name
Volume0
[↑↓]-Select
2.
Use the up/down arrow key to select the RAID set you want to delete, and then press
<Delete>. The following warning message appears:
3.
Press <Y> to delete the RAID set and return to the utility main menu, or press <N> to
return to the DELETE VOLUME menu.
5-16
[DELETE VOLUME MENU]
Level
RAID0 (Stripe)
Deleting a volume will reset the disks to non-RAID.
WARNING:
ALL DISK DATA WILL BE DELETED.
(This does not apply to Recovery volumes)
[ESC]-Previous Menu
[DELETE VOLUME VERIFICATION]
ALL DATA IN THE VOLUME WILL BE LOST!
(This does not apply to Recovery volumes)
Are you sure you want to delete "Volume0"? (Y/N):
Drives
Capacity
2
298.0GB
[HELP]
[DEL]-Delete Volume
Status
Bootable
Normal
Yes
Chapter 5: RAID Configuration
Advertisement
Table of Contents
