Safety Precautions; Comprehensive Instructions And Power Consumption Safety - JC-Tool JC-100A-HC User Manual

Safety precautions

Please read all the instrcutions and basic preventive measures during operation as
follows:
Warning-- to lower the risk of fire ,electric shock and injury
1. This tool must be used in a well-ventilated environment in case of fire danger.
2. Don't touch the blade in the case of electrical heating and don't put it beside clothes or
other inflammables.
3. Deal with the blade when it cools down in order to avoid accidental injury.
4. Please power dump or pull the plug when changing the blade.
5. Don't use the tool on a wet desk or ground in case of electric shock.
6. Don't operate the tool with wet hands in order to avoid electric shock.
7. Please use accessories and blades made or recommended by the manufactures.
8. Don't use damged power line or plug.
9. Don't burn the residue on the blades,or it would warp.
10. Turn on the switch until the blade touches the object and then start to heat the knife to cut.
11. Never burns the blade hot while not cutting materials.
12. The condition that the handheld part turns hot after a long times operation is normal.
13. The blade would not be heated if not installed correctly.
14. Avoid two cutting heads in touch for the risk of short circuit.
15. This tool is 15 seconds intermittent type, of which the lasting time to cut should not
exceed 60 seconds.

Comprehensive instructions and power consumption safety

1. Please ensure the operating environment is safe.
2. Please check whether the power condition complies with the product specifications.
03 JC MACHINERY & TOOLS INC.