Table of Contents
Advertisement
cables including power cable, network cable, audio and alarm
cables, etc.
4. Align the triangle mark on the camera and base plate, and
then rotate the camera clockwise until it is locked up by the
three bayonet joints on the base plate.
5. To disassemble the camera: Press the Push button on the base
plate, rotate the camera anticlockwise, and then you can
remove the camera from the base plate.
6. To adjust the view angle: Rotate the camera body clockwise or
anticlockwise with the base plate, and then you can adjust the
camera to the desired view angle.
PUSH
Advertisement
Table of Contents
