Table of Contents
Advertisement
2 Installation
Before you start:
Please make sure that the device in the package is in good
condition and all the assembly parts are included.
Make sure that all the related equipment is power-off during
the installation.
Check the specification of the products for the installation
environment.
Check whether the power supply is matched with your
required output to avoid damage.
Please make sure the wall is strong enough to withstand three
times the weight of the camera and the mounting.
If the wall is the cement wall, you need to insert expansion
screws before you install the camera. If the wall is the wooden
wall, you can use self-tapping screw to secure the camera.
If the product does not function properly, please contact your
dealer or the nearest service center. Do not disassemble the
camera for repair or maintenance by yourself.
2.1 Ceiling Mounting
Steps:
1. Drill two screw holes and the cable hole according to the
supplied drill template.
Advertisement
Table of Contents
