Table of Contents
Advertisement
Available languages
Available languages
014
Counting modes / Functions
Mode
Sheet counting mode
The device is counting all banknotes in the hopper and will
show the counted sheets in the display.
Batch function
You can adjust the batch size. For example, choosing the batch
size 20. The machine will stop when reach the adjusted batch
size (sheets).
Addition of several counting procedures
By using the addition function, the device will add several coun-
ting results. In the end, the machine will show the total counted
sheets in the display.
Counterfeit detection
By activating the respective counterfeit detecion, the device will
check all banknotes for authenticity. If a suspicious banknote
gets detected, a message „CFx" will be shown in the display
and the machine stops counting. The affected banknote will be
in the last postion of the banknote stacker.
Dis- / Enable by press „key"
CNT
Default setting
counting banknotes
„batch"
By pressing the „batch" - key you can
activate the batch function. By pressing
several times, you can adjust the batch
size in bigger steps. For adjusting single
steps, please press the keys „+" or „-".
„add"
By pressing the „add" - key the addition
+
function get´s activated and the add-LED
will be turned on.
„uv" / „mg/ir"
By pressing the respective key you
can activate / deactivate the relevant
counterfeit detection.
€
€
For Euro banknotes, we recommend to
Counterfeit
activate all three detecting functions.
For SFr banknotes, we recommend to
activate the UV detecting function.
More currencies on request.
Advertisement
Table of Contents
