Table of Contents
Advertisement
Quick Links
IN USE
Always connect OUTPUT A first. OUTPUT A can
be
used
independently,
for
example
as
a
transparent signal buffer. Using OUTPUT B only
may cause noise issues, so always use OUTPUT B
with OUTPUT A connected also.
Experiment with the position of the PHASE
SWITCH to achieve the optimum sound with
BOTH amps selected. Two amps which are out of
phase with each other will sound lifeless, so your
ears will be the best judge.
POWER
9V Battery Operation
The battery installed at the factory is for testing
purposes. If you notice a drop in performance,
replace the battery. To replace the battery,
unfasten the four screws on the base and secure
USER MANUAL
the new battery in the battery clip, making sure
to
observe the battery's polarity (+
/
-).
Disconnect the input when not in use to prolong
battery life.
ORANGE AMPS
DC Adaptor
The Amp Detonator can be powered by 9 or 12V
LONDON • ENGLAND
DC. Use a regulated AC-DC adaptor fitted with a
V
W
™
OICE OF THE
ORLD
centre negative plug (2.1mm).
E
. 1968
ST
Advertisement
Table of Contents
Related Manuals for ORANGE The Amp Detonator
Summary of Contents for ORANGE The Amp Detonator
- Page 1 Disconnect the input when not in use to prolong battery life. ORANGE AMPS DC Adaptor The Amp Detonator can be powered by 9 or 12V LONDON • ENGLAND DC. Use a regulated AC-DC adaptor fitted with a ™ OICE OF THE ORLD centre negative plug (2.1mm).
- Page 2 Connecting a jack plug to the input INPUT switches on the power to the pedal OUTPUT Buffered output Buffered transformer isolated output. OUTPUT OUTPUT A must also be in use for OUTPUT B to function correctly Switches between either OUTPUT A or OUTPUT B SWITCH Selects both OUTPUT A and OUTPUT B.
Need help?
Do you have a question about the The Amp Detonator and is the answer not in the manual?
Questions and answers