Operating Determinations - SHOWTEC Light Brick User Manual

If device is dropped or struck, disconnect mains power supply immediately. Have a qualified
•
engineer inspect for safety before operating.
If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not
•
switch it on immediately. The arising condensation water might damage your device. Leave the
device switched off until it has reached room temperature.
If your Showtec device fails to work properly, discontinue use immediately. Pack the unit securely
•
(preferably in the original packing material), and return it to your Showtec dealer for service.
Clearing the memory too often may cause damages to the memory chip. Be careful not to initialize
•
your unit frequency often to avoid this risk.
For adult use only. Device must be installed out of the reach of children. Never leave the unit running
•
unattended.
For replacement use fuses of same type and rating only.
•
Repairs, servicing and electric connection must be carried out by a qualified technician.
•
WARRANTY: Till one year after date of purchase.
•

OPERATING DETERMINATIONS

This device is not designed for permanent operation. Consistent operation breaks will ensure that the device
will serve you for a long time without defects.
The maximum ambient temperature t
If this device is operated in any other way, than the one described in this manual, the product may suffer
damages and the warranty becomes void.
Any other operation may lead to dangers like short-circuit, burns, electric shock, lamp explosion, crash etc.
You endanger your own safety and the safety of others!
must never be exceeded.
a
3