Keystone WT04 Quick Start Manual

WT04
WIFI VIBRATION SENSOR
Wi-Fi WATER TEMPERATURE SENSOR
QUICK START GUIDE
Getting started
1. Please check that your smart phone app is updated.
2. Please also check that your Wi-Fi router is working properly and
operates on 802.11b/g/n 2.4GHz with WPA/WPA2 encryption.
We also support OPEN encryption. i.e. no password
2.4GHz is the standard connection for most routers.
Please do NOT choose 5GHz connection.

Product Features

1. Built-in Wi-Fi module that sends all alerts to your Smartphone
2. Separate low battery and loss of signal notifications
3. Life-time cloud service is included
4. Simple Wi-Fi connection set up with APP
5. Individual tag setting from your smartphone
6. APP records last 30 activations time and date stamped
7. Schedule up to 4 periods per day when unit is automatically
turned off.
8. Low and High Sensitivity Options
Installing the APP
１. Before powering up the device, please install our free
NetzHome APP onto your phone.
2. Now complete your User Profile by inputting your email
address and a 6-to-20-digit password.
NetzHome
3
In the Box
Vibration Sensor
Wi-Fi Water Temperature Sensor
1
Setting up your DEVICE
Go to the location in the WIFI Building where you eventually wish to
install the Sensor. Look at your smart phone and ensure you have a
good and steady WIFI connection. Exit the APP, open SETTINGS
on your smart phone and click. If you just have a main Router, it will
be showing its reference (or SSID). However, if you have one or
more extenders, they may also be showing underneath. VERY
IMPORTANT – The Sensor will only communicate Alarm signals to
the WIFI Router or Extender that you are about to pair to so it is
essential that you pair it to the closest/strongest WIFI signal/SSID
Screwdriver
QR Code Card
2