Summary of Contents for AquaStar Ultimate Ozone U3000 Kit
Page 1
ULTIMATE OZONE™ OZONE GENERATION SYSTEM INSTALLATION AND USER'S GUIDE MODELS U1000 and U3000 Kit IMPORTANT SAFETY INSTRUCTIONS READ AND FOLLOW ALL INSTRUCTIONS SAVE THESE INSTRUCTIONS...
Page 2
Attention Installer: Read this manual completely before attempting installation. Failure to follow these instructions could result in injury or death and will void the product warranty. Consult AquaStar Pool Products with any question regarding this product. This guide must be left with the pool owner.
Mounting hardware head must not be smaller than 0.25 inches (6.3 mm) in diameter Aquastar Pool Products Inc. offers a one-year limited and the threads of the hardware must be smaller than warranty on the Ultimate Ozone™. See warranty sec- 0.25 inches (6.3 mm) in diameter.
Page 4
90° turns. A junction box must be installed on the deck to avoid water back- flow (AquaStar Model #JBRxxx or JBSxxx). Connect the conduit to the 1” port located at the bottom of the junction box. Connect the ¼” ozone compatible tubing to the ¼” hose barb located on the bottom of the ozone unit and feed the tubing through the conduit to the junction box.
Page 5
SECTION 3. Operation Maintenance The Ultimate Ozone™ requires little maintenance. For a Initial System Start-Up properly prerforming system, ensure that the skimmer basket is regulary checked and kept clean Upon completing installation you may be ready to from excess debris. Every month all visual begin start-up procedures.
Page 6
Customer following the procedures set forth below, AquaStar will, at its option, repair or replace such item or part at its own cost and expense. AquaStar’s maximum obligation under this warranty is limited to the repair and replacement of the U1000 and U3000 Kit.
Need help?
Do you have a question about the Ultimate Ozone U3000 Kit and is the answer not in the manual?
Questions and answers