Advertisement
J201 CLEAN BOOST ASSEMBLY INSTRUCTIONS
Thank you for purchasing the J201 Clean Boost Pedal Kit from Mammoth Electronics! This is a intermediate level kit that and we
have made every effort to make the assembly as easy as possible.
• Soldering station (with temperature control/regulation)
• Solder & Flux
• De-soldering braid or solder sucker
• Wire strippers
• Wire cutters
• Phillips head screwdriver
• Double-stick foam tape
Item
Quantity
Position
1
3
C1, C2, C3
2
1
C4
3
1
C5
4
2
R1, R4
5
2
R3, R6
6
2
R2, R5
7
2
R8
8
1
D1
9
1
D2 (On/Off Indicator)
10
1
R7
11
2
Q1, Q2
12
1
Output Jack
13
1
Input Jack
14
1
On/Off Switch
15
1
DC Power Jack
16
1
(optional)
17
1
(On/Off Indicator)
18
1
On/Off Switch
19
1
Main PCB
20
1
Standalone Module
If you have any questions about building the J201 Clean Boost or need any help with trouble-shooting, please send us an
email at sales@mammothelectronics.com or give us a call at 405-254-4112.
RECOMMENDED TOOL AND SUPPLY LIST
J201 CLEAN BOOST KIT PARTS LIST
Part
.22uF
.01uF
47uF
1M
6.8K
2.2K
3.3K
1N4001
Green LED
500KA
J201
1/4" Mono Jack
1/4" Stereo Jack
3PDT Stomp Switch
DC Power Jack
Battery Snap
LED Bezel
3PDT Wiring Board
J201 PCB
All kits come standard with the following hardware:
Click-Less Module
• 1 Click-Less True Bypass relay board (if selected)
• 1 ¼ inch mono jack
• 1 ¼ inch stereo jack
• 1 DC Power jack
• 1 9V Battery Snap
• 1 3PDT wiring board
• 1 LED Bezel
• 1 3PDT stomp switch (if selected)
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Mammoth J201
Summary of Contents for Mammoth J201
- Page 1 J201 CLEAN BOOST ASSEMBLY INSTRUCTIONS Thank you for purchasing the J201 Clean Boost Pedal Kit from Mammoth Electronics! This is a intermediate level kit that and we have made every effort to make the assembly as easy as possible. RECOMMENDED TOOL AND SUPPLY LIST •...
- Page 2 Pin 7- Not used. Can be used as extra ground point if needed. Pins 3 and 7 are tied together. If you have any questions about building the J201 Clean Boost or need any help with trouble-shooting, please send us an...
- Page 3 Pin I: Wire to signal lug of input jack Pin S: Wire to connection point labeled “IN” If you have any questions about building the J201 Clean Boost or need any help with trouble-shooting, please send us an email at sales@mammothelectronics.com or give us a call at 405-254-4112.
- Page 4 Wire to Main Ground Lug of Output Jack Solder Jumper Wire Here If you have any questions about building the J201 Clean Boost or need any help with trouble-shooting, please send us an email at sales@mammothelectronics.com or give us a call at 405-254-4112.
- Page 5 If you have any questions about building the J201 Clean Boost or need any help with trouble-shooting, please send us an email at sales@mammothelectronics.com or give us a call at 405-254-4112.
- Page 6 COMMON COMPONENTS LEGEND This is an LED (Light Emitting Diode). It is Polarized, meaning it has a negative and positive side. The shorter leg of the LED is typically the This is a Transistor. It has a curved side and negative side.
Need help?
Do you have a question about the J201 and is the answer not in the manual?
Questions and answers