Advertisement
CrD-9723ru - single charging and communication cradle
sysTEm mEnu
in order to go to the operating system menu, press
the up, Down and scan Keys all at once.
This menu enables you to:
- Download software
- Perform diagnostics
- adjust date and time
- Change the terminal iD
- reset the terminal
Documentation, drivers and software updates for the oPL-9815 are available at:
for information about the oPL-9815, including detailed setup instructions, downloads and more, visit us at:
www.opticonusa.com/support
© Copyright opticon. all rights reserved. This information is subject to change without prior notice.
QUICK START GUIDE
OPL-9815
DoCumEnTaTion
www.oPTiConusa.Com/sTarT/oPL
and
www.opticon.com/service-and-support.aspx
for availability, contact your local representative.
COmmUnICATIOn mETHOD (CRADLE TO HOST)
single charging and communication cradle.
Communicates with the host via rs-232C or usb interface.
CHARGInG TImE
5 hours
LED InDICATOR
red: power is on
flashing green: data collector sends to host
flashing yellow: host sends to data collector
OPTICAL wInDOw
irDa communication interface for data transmission
ELECTRICAL COnTACTS
if the oPL-9815 data collector is inserted, the battery
will automatically start charging.
OTHER CRADLES
additional communication/charging cradles are sold
separately.
gPs
TTff (Time To first fix) is the time required for a gPs
receiver to acquire satellite signals and navigation data,
and calculate a position. The TTff for the oPL-9815 is
as follows:
- hot start: 1 sec. (outdoor without obstructions)
- Cold start: 35 sec.
Advertisement
