K1EL
WKUSB
WKUSB with WinKeyer3 User Manual
You will get this pop up when you pick an 'in use' port. If you are sure the port is not assigned to
any other serial com device, click Yes and then continue on to close all remaining dialog boxes.
WinXP Com Port Viewing and Reassignment
To start, move cursor to lower left corner of the screen and left click on Start. Then...
1) Right click on MyComputer and 2) Right click on Properties:
Right click on Hardware:
Right click on Device Manager:
WKUSB User Manual
12/20/2017
Rev 1.0
Page 32