Table of Contents
Advertisement
1
Start/Stop
Recording To a
Memory Card
A. Make sure an SD card is inserted in the AC50W
(not included).
B. Plug the AC50W into a 110V-240V power
outlet. It will power on and automatically begin
to record video to the SD card.
C. Loop Recording: When the memory card is
full, the AC50W automatically starts recording
over the oldest video files; it will continue to
record even if the memory card becomes full.
D. Video files are recorded in 50mb (about 2 min
15 sec) segments to avoid large files sizes. This
interval can be adjusted using the FUVISION App
(refer to section 10e).
E. To stop recording, unplug your AC50W from
the power outlet. This stops the recording and
the file currently being recorded is saved to the
memory card.
6
Advertisement
Table of Contents
