HighGear Axis Quick Reference Manual

Set/Light
Mode
Start/Lap
This quick guide will equip you with the essential information to operate and sell a HighGear Axis, Summit or AltiTech 2. It
includes quick tips and a question and answer section.
Axis/Summit/AltiTech2 Key Features include:
Time, Compass, Barometer, Altimeter, Chronograph, and Alarm
Setting Time & Date
set/light
• Press button until "ADJUST HOLD" flashes, "HOUR" will display and digits begin to flash.
start/lap
• Use button (+) and
Mode
• button will scroll to minute, second, year, month, day, & 24 hour or 12 hour setting.
set/light
• Press button to lock in information.
• To toggle between Time 1 (T1) and Time 2 (T2), press

Calibrating the Compass

• THIS COMPASS HAS TO BE CALIBRATED THE FIRST TIME YOU USE IT.
• Press set/light button until "CAL HOLD" flashes. When "CAL" appears, rotate the unit clockwise while holding it level for 3 full
rotations, each rotation lasting 10-15 seconds.
set/light
• Press button and the declination setting screen will appear.
start/lap
• Use button (+) and
mode
• Use button to scroll between digits and cardinal direction.
set/light
• Press button to end calibration.

Setting Barometric Pressure

set/light
• Press button, "ADJUST HOLD" will flash, "SET CURRENT WEATHER" will scroll at top of display and icons begin flashing.
start/lap stop
• Use and
• Once digits start flashing for sea level pressure, use
number is displayed, press

Setting Altitude

et/light
• Press s button until "CAL HOLD" appears and digits begin to flash.
start/lap
• Use button (+) and
mode
• Press button to access MAX and ACCUMULATED altitudes. Press
• Once main altitude displays, the scrolling max and accumulated altitude is set press
• To add a reading to your log book, press
• Set altitude either in feet (FT) or meters (M): press
190 Continuum Dr. Fletcher, NC 28732 828-681-0335 Toll: 888-295-4949 Fax: 828-681-5320 www.highgear.com
Stop
Start/Lap
Mode
Set/Light
stop
button (-) to adjust to desired setting.
stop
button (-) to adjust digits.
buttons to choose desired icon, then press
set light /
button to lock in information.
stop
button (-) to adjust digits.
start/lap
button and hold until "STORED DATA" stops flashing.
stop
Quick Reference Guide for
Axis / Summit / AltiTech 2
Start/Lap
Set/Light
stop stop
button. Hold button for 2 seconds to set either time for display.
mode
button to advance to sea level barometric pressure.
start/lap stop
button (+) and
stop
button to zero out the max and accumulated altitude.
button and hold until the desired setting stops flashing.
Stop
Mode
button (-) to adjust digits. When the desired
set/light
button to exit.
Start/Lap
Set/Light