Function; Atmocheck® One - HiTec Systems AtmoCheck Operating Manual

Operating Manual

Function

With the help of the built-in pump the
AtmoCheck® draws a gas sample into the
integrated measuring chamber and on to
its measuring cells.
Threshold values can be set so that the
device produces an optical signal for
measurement results that are outside the
specified range.
After completion of the analysis, the
measured concentrations are saved
automatically with the date, time and the
AtmoCheck® One
AtmoCheck® One has an electrochemical
oxygen measuring cell. The O
in the measured gas mixture produces a
low level of voltage in the measuring cell.
This voltage is measured and converted
into a concentration value which is then
indicated on the display.
specified threshold values.
If the memory is full, the oldest value is
overwritten when new measurements are
stored. The measurement value memory
can be read-out and deleted by the user at
any time with the software supplied.
Refer to the operating manual of the
supplied software for mo more detailed
information on processing the stored
measurement readings.
The life of the O
content 12 - 18 months, but this depends heavily
2
on the oxygen content and the number of
measurements taken.
Therefore, we recommend regular
maintenance of the analyzer at a minimum
of every 12 months.
- 4 -
-measuring cell may be
2