Table of Contents
Advertisement
Syclone Portable Gamma-Ray Spectrometer, Revision 10
ENGLISH
b) BATTERY – sets the battery type. Current selection and default is
c) ACTIVE LIBR – this sets the Library used for analysis – default is
MEDICAL and USER are optional.
Note: The libraries have been selected as optimum for the different applications.
However some users have special requirements and require a special library. Contact
RadComm for Product Support Information concerning the development of USER
Libraries (SEE
The Syclone is shipped with the STANDARD Library as the Default Library. In order to
switch between libraries the Syclone must be placed in Manual Mode. Move the joystick
(long click down) to navigate from CONFIGURE to MISCELLANEOUS and a short click
down to get to ACTIVE LIB. Move the joystick (short click) from side to side to scroll
through the selection of libraries as shown above. Remember to switch back to Automatic
Mode if required.
Once the parameter setting is selected, the actual isotopes in the library can be viewed in
INFORMATION / LIBRARY as described (see
d) LOAD DEFAULT – If for some reason the Syclone Unit is reacting poorly, the parameter
settings may be incorrectly set. The User may bring the Syclone unit back to its original
condition by Loading the Default settings. (See Figures)
e) LCD MODE – User can select between Day and Night mode.
f) GPS - Turns GPS On or Off.
g) Bluetooth - Turns Bluetooth On or Off.
MAIN MENU Exits back to the Main Menu.
RadComm – Proprietary
, Chinese, Japanese, Spanish, German.
Appendix
B).
Page 45
LI-ON
Section
5.6).
Revision Date: March 3, 2016
5.0 MANUAL MODE
– Lithium Ion.
STANDARD.
Advertisement
Table of Contents
