CEL-FI G32-2 Quick Start Manual

Basic Functionality
The Cel-Fi GO M connects to an external Donor Antenna to draw
in a cellular signal from the macro network. The Cel-Fi GO M
Smart Signal Booster finds the appropriate cellular signal, per
the product's configuration, improves the signal, and amplifies it.
Improved service is provided to the user via the Server Antenna.
NOTE: A Stationary version ("GO X") of the product is available. Go
to cel-fi.com for details.
Cel-Fi WAVE Mobile App
The Cel-Fi WAVE app provides a User Interface to Cel-Fi systems.
The app's dashboard shows the system "Boost" value. A numeric
representation mapped to the amount of Signal Gain the system
is providing. Higher is better, with nine (9) being the highest value.
Cel-Fi WAVE and Cel-Fi GO M
Your Cel-Fi GO M will automatically select the strongest cellular
signal to boost. However, you may manually configure the system
preferences using Cel-Fi WAVE. Connect to Cel-Fi GO M with a
bluetooth enabled mobile device, and manage the boost settings.
NEMA 4 Rating
The Cel-Fi GO M is NEMA 4 rated, and can be used both indoors
and outdoors.
The NEMA 4 rating provides the following advantages:
• A degree of protection against ingress of solid foreign objects
(falling dirt and windblown dust)
• A degree of protection from the ingress of water (rain, sleet,
snow, splashing water, and hose directed water)
• Equipment will be undamaged by the external formation of ice
on the enclosure

User Interface

Cel-Fi GO M features an LED on the top face to indicate the unit' s state:
LED
Solid GREEN The unit is working properly and boosting properly.
Blinking GREEN Unit is scanning for networks to boost.
Blinking RED The unit is in an error condition. Use the Cel-Fi WAVE app to
check the error code meaning and remedy.
Solid RED The unit has a hardware error and is not booting up normally.
NOTE: In mobile usage, it is normal for the Cel-Fi GO M to fluctuate between
scanning and boosting. The Cel-Fi GO M automatically adjusts its boost
behavior based on available signal.

Troubleshooting

ISSUE MEANING
Continual Unit is
Blinking operational, but
GREEN not attaching to a
network to boost.
Solid RED LED Unit is not
operational.
Antenna Kitting
The following antennas are authorized to be used with Cel-Fi GO M
Smart Signal Booster:
MODEL
A41-V21-100
MODEL
A41-V21-101
MODEL
A41-V30-100
Additional Cel-Fi Antenna options are available at www.cel-fi.com/antennas
www.cel-fi.com
MEANING
ACTION
• Make sure both antennas are connected
properly and are appropriate for the desired
frequencies to boost.
• Make sure the selected operator to relay is
available at your location. This can be checked
with the Cel-Fi WAVE application. If the
service is not available, it cannot be boosted.
• Unplug and reinsert power.
• If restart has no effect, contact vendor for
remedy.
DESCRIPTION FREQUENCY
Mobile Mag Mount 698-960 // 1710-2700 MHz
CERTIFICATION BAND SUPPORT
FCC 2/4/5/12/13/28
DONOR SERVER
3
DESCRIPTION FREQUENCY
Mobile Mag Mount 698-960 // 1710-2700 MHz
CERTIFICATION BAND SUPPORT
CE 1/3/5/7/8/20
DONOR SERVER
3
DESCRIPTION FREQUENCY
Patch Antenna 698-960 // 1710-2700 MHz
CERTIFICATION BAND SUPPORT
FCC, CE 1/3/5/7/8/20/2/4/5/12/13/28
DONOR SERVER
3
Cel-Fi GO M

Quick Start Guide

Smart Signal Booster
Cel-Fi GO M is optimized for mobile applications
such as trucks, boats, and RVs. It features
the IntelliBoost technology which allows it to
™
automatically adjust to the fast changing cellular
network conditions as you move. ONLY when
the signal is poor, will the Intelliboost maximizes
gain while boosting thus preventing any potential
degradation of existing cellular service.
IN THE BOX
Main Unit
IN THE MOBILE KIT
Included in the Mobile Kit (MK) version:
External Magnetic Mount
(Mag Mount) Antenna
(used as the donor)
For more information, visit: www.cel-fi.com
™
Power Supply
Interior Patch
Server Antenna