E-Z UP Endeavor Owner's Manual page 18

SETUP
2
SECURE AUTO-SLIDER
A
Fold up the fabric top corner to expose the Auto-Slider
B
Lift shelter corner slightly off the ground and engage the Auto-
Slider Pull Pin by pushing up on the frame side trusses with one
®
hand while holding down the top of the frame leg with the other
hand. The pins will auto-engage when aligned with the holes on
the frame legs.
C
After the Auto-Slider
fabric top down over the frame leg, making sure to align and
secure the hook and loop strips on the fabric top to the frame.
D Repeat on all remaining corners.
18 18
Endeavor Owner's Manual
OM_Endeavor_0617.indd 18
PULL PIN
®
Top of Frame Leg
Fabric Top Corner
Auto-Slider
® Pull Pin has locked into place, pull the
Pull Pin
®
Pull Pin.
®
6/30/2017 5:25:04 PM