Frequency Setting; Utilities; Revision History; Figure 11: Frequency Setting Display - Semtech SX1261 User Manual

6.3 Frequency Setting

In this menu you can set the frequency for each modulation:
- Select the frequency Step that you wish to tune: from 1 Hz to 10 MHz
- With - and + change the value of the step of your tuned frequency
- The resulting frequency in displayed in Freq
- Additionally you can select one of the three Preset frequencies by simply
pressing the desired frequency value.

7. Utilities

In this menu you can reset the SX1261/SX1262 Development Kit to its factory
settings:
 Press on Fact. Reset
The Utilities section is also useful to check the Firmware Version
You can modify:
- the RxBoost mode: On (True) or Off (False)
- the power regulation mode (DC Reg): either DCDC or LDO
- the Packets limit: Infinite, 100, 200, 500 or 1000

8. Revision History

Version
1.0
1.1
Wireless & Sensing Products
User Guide for the SX1261 and SX1262 Development Kits
UG.DEV.SX126x.W.APP
Date
October 2017
March 2018
Rev 1.1
March 2018
Modifications
First Release
Update of the contents of delivery
Update of the display illustrations
Update of the LoRA and GFSK Modulation settings

Figure 11: Frequency Setting Display

Figure 12: Utilities Display

Page 11 of 12
Semtech