Page 1
99 Washington Street Melrose, MA 02176 Fax 781-665-0780 TestEquipmentDepot.com XFTP SAT LITE Satellite Meter Quick Reference Guide...
Page 2
To load a new satellite configuration, press the Button FIND to display the satellite configuration list. Note: The XFTP SAT LITE will always power up in this mode. • Use the Direction Button(s) to highlight the desired configuration, or use the...
Page 3
Signal Display After loading a satellite configuration (or pressing the Button to use the last configuration), the XFTP SAT LITE shows the Signal Display Mode with S (Signal Strength) and Q (Signal Quality) displayed for dish alignment. Note: If a signal is present, an audible tone is heard proportional to signal strength.
Page 4
• Signal Display - Signal Strength & Signal Quality • Measurement Display - BER & C/N • Satellite Display - Satellite Name & Longitude See the XFTP SAT LITE Operation Manual for complete instructions on how to use your instrument. 99 Washington Street...
Page 5
Satellite Configurations Viewing Configuration Parameters To display the parameters of the currently loaded satellite configuration, press the Button. To view the list of stored satellite configurations, press the Button. LOAD • Use the Direction Button(s) to move through the list of stored configurations, or use the Direction Button(s) to move through the list 4 configurations at a time.
Page 6
Saving Configurations From the configuration parameter display, press the Button to save the new satellite configuration. • Use the Direction Button(s) to highlight the memory location for your satellite configuration, or use the Direction Button(s) to move through the list 4 configurations at a time.
Page 7
99 Washington Street Melrose, MA 02176 Fax 781-665-0780 TestEquipmentDepot.com 9710 Park Davis Drive Indianapolis, IN 46235 (317) 895-3600 www.trilithic.com P/N 0010280000 Rev. 11/07...
Need help?
Do you have a question about the SAT LITE and is the answer not in the manual?
Questions and answers