Advertisement
Backlight Mode Switch
Press Fn + Nkey (Lightning key) to progress through the different backlighting modes: Individual
Dimming Laser Sidetrack Ripple Explosion Breathing All LED off All LED on. Under all
LED on mode, you can press Fn + ↑ and Fn + ↓ to adjust brightness. There are 8 levels of
brightness. If you want to preserve the backlighting status after you power down, press Fn + S.
Restore to factory default
Press and hold Fn + R, Toggle LED will start flashing after 3 seconds. Continuing to hold Fn + R
until the Toggle LED flashes for 9 times will restore to factory default.
Key Code Downloader
By using our key code downloader (available for download on the Deck website:
http://www.deckkeyboards.com) users can read the macros from one keyboard and upload it to
other keyboards.
LED Scripts
Users can also write their own scripts to control the LED behavior. For details, please refer to the
script manual, also available for download on the Deck website:
http://deckkeyboards.com
Function key combinations
Advertisement
