Advertisement
The RX-462 2.4GHz FHSS-4T 4-Channel receiver is a Super Response, Telemetry receiver that is used with the
Sanwa MT-4 2.4GHz FHSS-4T transmitter. This receiver suppprts Sanwa Telemetry and features an extremely
low latency time and high frame rate, which makes you feel more connected to your model than ever.
In addition to providing Telemetry readings for two temperature sources, RPM and receiver battery voltage, when used
with an electric-powered vehicle, the RX-462 receiver is capable of reading the voltage of your vehicle's motor battery.
This allows you to monitor the motor battery's voltage in real-time during use.
This receiver is currently compatible only with the Sanwa MT-4 2.4GHz FHSS-4T transmitter.
It is not compatible with Sanwa 2.4GHz FHSS-2 or FHSS-3 transmitters. In addition, due to differences in the
implementation of 2.4GHz technology among different manufacturers, this receiver is not compatible with
any other transmitter brands.
08 02
Model: RX-462 Telemetry
Advertisement
Table of Contents
Related Manuals for Sanwa RX-462
Summary of Contents for Sanwa RX-462
- Page 1 In addition to providing Telemetry readings for two temperature sources, RPM and receiver battery voltage, when used with an electric-powered vehicle, the RX-462 receiver is capable of reading the voltage of your vehicle’s motor battery. This allows you to monitor the motor battery’s voltage in real-time during use.
- Page 2 The RX-462 receiver features inputs for two Temperature Sensors and one RPM Sensor, in addition to the Voltage Sensor that can read your receiver battery’ s voltage or your motor battery’s voltage Use the diagram below to make the servo and/or ESC, switch harness and battery connections to the RX462 receiver.
Need help?
Do you have a question about the RX-462 and is the answer not in the manual?
Questions and answers