Advertisement
Device Network Search
Immediate Refresh
Device Name Device Type
Product Model
IP Address
Http Port
Data Port
Subnet
name
IPC
unknown
192.168.226.201
80
9008
255.255.
name
IPC
unknown
192.168.1.2
80
9008
255.255.
name
IPC
unknown
192.168.1.3
80
9008
255.255.
Total Device: 3
Local IP Address:192.168.1.4
Subnet Mask:255.255.255.0 Gateway: 192.168.1.1
③ Modify the IP address. The default IP address of this camera
is 192.168.226.201. Click the information of the camera listed
in the above table to show the network information on the right
hand. Modify the IP address and gateway of the camera and
make sure its network address is in the same local network
segment as the computer's. Please modify the IP address of
your device according to the practical situation.
Modify Network Parameter
Mac Address
CE :98 :23 :75 :35 :22
IP Address
192 .168 . 1 . 201
Subnet Mask
255 . 255 . 255 . 0
192 .168 . 1 . 1
Gateway
Modify
For example, the IP address of your computer is 192.168.1.4.
So the IP address of the camera shall be changed to 192.168.1.X.
After modification, please input the password of the administrator
and click "Modify" button to modify the setting.
The default password of the administrator is "123456".
④ Double-click the IP address and then the system will pop up the IE
browser to connect IP-CAM . IE browser will auto download
the Active X control. After downloading, a login window will pop
up as shown below:
4
About
Modify Network Parameter
Mac Address
CE :98 :23 :75 :35 :22
192 .168 . 226 . 201
IP Address
Subnet Mask
255 . 255 . 255 . 0
Gateway
192 .168 . 226 . 1
Modify
i
Tip: Enter the administrator password, and
then modify the network parameters.
Restore IPC Default Configuration
Input the user name and password to login.
DNS：210.21.196.6
The default username is admin; the default password is 123456.
●
Directly Access Through IE
The default network settings are as shown below:
IP address: 192.168.226.201
Subnet Mask: 255.255.255.0
Gateway: 192.168.226.1
You may use the above default settings when you log in the camera
for the first time.
① Set the IP address of the PC and the network segment should be as
the same as the default settings of IP-CAM. Open the network and
share center. Click "Local Area Connection" to pop up the following
window. Select "Properties" and then select Internet protocol
according to the actual situation (for example: IPv4). Next, click
"Properties" button to set the network of the PC.
HTTP:80
Data Port:9008
5
② Open the IE Browser and input the default address of IP-CAM
and confirm. The IE browser will download Active X control
automatically.
③ After that, the login dialog box will pop up.
④ Input the default username and password and then enter to view.
Preset Description
Call No.90 Preset
Run track 1
Run cruise 1
Call No.91 Preset
Run cruise 2
Call No.92 Preset
Run cruise 3
Call No.93 Preset
Run cruise 4
Call No.94 Preset
Call Preset
Call No.95 Preset
OSD menu
Call No.97 Preset
Enable random scan
Enable P-PSCAN
Call No.99 Preset
Set random scan; Task auto
Set No.91 Preset
call the beginning point
Set No.92 Preset
Set left border of P-PSCAN
Set right border of P-PSCAN
Set No.93 Preset
Set the boundary value of the
Set No.94 Preset three times
near and middle infrared light
Set Preset
Set the boundary value of the
Set No.95 Preset three times
middle and far infrared light
6
450043000680 A1
Advertisement
