Table of Contents
Advertisement
ADMIN SETUP
Configure global
recorder settings
Write Video Management System Log – Enable to write RADIUS events to the log of the recorder.
Use Digital Watermarking – Adds a user defined digital watermark to exported JPEG files.
Auto reconnect delay time – Specifies amount of time RADIUS waits before attempting to reconnect
after a disconnection with a recorder.
Sound alert on free disk space – Enable an audible alert to sound when HDD space becomes limited
on the recorder.
PTZ command interval – Delay PTZ commands to reduce the risk of multiple commands reaching the
camera at the same time due to network latency.
Network timeout setting – Amount of time before RADIUS reports being disconnected from the
recorder.
Alarm Log Cleanup Schedule – Schedule alarm log clean up and resize the alarm log file.
Use Keyboard Control – Enable use of a PTZ joystick keyboard controller.
Additional DVR Information – User-supplied contact information.
Run Data Manager – Opens the Data Manager application to import and export configuration, log, and
map files.
Hide Video Noise (Lines) – Adjust settings to hide analog camera video noise.
Audio – Enables Audio for Live and Remote functionality
Set Schedule for discarding normal alarm – Create a schedule to filter out normal alarms, by
category, from the event viewer display.
Schedule Alarm Log Clean Up and Resize the Alarm Log File
Enter additional
information
Import / Export
configuration, log
and map files
37
Advertisement
Table of Contents
