Microdigital MDC-7220WDN-30 User Manual

USER'S MANUAL
MDC-7220WDN-30
WDR IR INDOOR DOME CAMERA
FEATURES
• 1/3" 960H Double Scan High Sensitivity CCD
• Varifocal 2.8~12.0mm Lens
• ICR (True Day & Night)
• Color 700 TV Lines, BW 800 TV Lines
• Wide Dynamic Range, Adaptive Tone Reproduction (ATR-Ex)
• 2D+3D Noise Reduction, HLC, DIS, Privacy Mask, Intelligent Motion Detection
• Intelligent Object Detection
• 30 units of IR LEDs
• OSD Menu Control over UTC
• 12VDC
Warning
• Any changes or modifications in construction of this device which are not expressly ap-
proved by the party responsible for compliance could void the user's authority to operate
the equipment.
• This installation should be made by a qualified service person and should abide by all
local codes.
PRECAUTIONS
Only use the camera in the temperature ranges
• Do not install the camera in ex- of the specification.
treme temperature conditions. Be especially careful to provide ventilation
when operating under high temperatures.
• Do not install or use the camera
in an environment where the It can cause the image quality to be poor.
humidity is high.
• Do not install the camera under
Severe lighting change or flicker can cause the
unstable lighting conditions. camera to work improperly.
This is one of the most important parts of the
• Do not touch the front lens of
camera. Be careful not to leave fingerprints or
the camera.
dirts on the lens cover.
• Do not drop the camera and
It can cause malfunctions to occur.
protect it from physical shocks.
• Never keep the camera pointed
It can damage the Image Sensor.
directly at strong light.
• Do not expose the camera to If exposed to radioactivity the Image Sensor
radioactivity.
will fail.
If it gets wet, wipe it dry immediately. Liquids
• Do not expose the camera to
can contain minerals that corrode the elec-
rain or spill beverage on it.
tronic components.
SPECIFICATION
Model no. MDC-7220WDN-30
Image Sensor 1/3" 960H Double Scan High Sensitivity CCD
Signal System NTSC
Scanning Frequency(H) 15,734KHz(H)
Scanning Frequency(V) 59.94Hz(V)
Total Pixel 1020(H) x 508(V)
Effective Pixels 976(H) x 494(V)
Horizontal Resolution Color 700 TV Lines, BW 800 TV Lines
Video Output Level Composite 1.0Vp-p(75Ω load)
S/N Ratio More than 52dB (AGC off)
Lens Mount Varifocal 2.8~12.0mm Auto Iris Lens, ICR (True Day & Night)
Min. Illumination 0 Lux (IR LED ON)
IR LED 30 units of IR LEDs
Shutter Speed 1/60sec.~1/100000sec.(60Hz)
Exposure Auto / Shutter PRI / Manual
Lens DC / Video / Manual
Gain Control On / Off (Max 30dB)
Digital Slow Shutter Man x2~x512 / Off
Brightness 1 ~ 15 Steps
WDR On / Off, Wide Dynamic Range
BLC On / Off
Day & Night Day / Night / Auto / Ext
White Balance ATW / One Push / Indoor / Outdoor / Manual / Auto
Chroma Low / Mid / High
Image HLC / DNR / HR / Mirror / Sharpness / Effect / Freeze / E.Zoom (Max x2~x32)
DNR Off / Manual / Auto
HR 1~7 Steps / Off
Privacy Mask 16 Positions / Off
Motion Detection 3 Positions / Off
Object Detection On / Off
Special Sync / Phase / DIS / Defect Detection / Scene Mode / Comm
DIS On / Off
Scene Mode User / Normal / Traffic / Back Light / Day&Night / Casino
Multi Language English / Chinese / Korean / Japanese
OSD Control over Coaxial Cable by MDR-x490, x690, x900 or UTC Remote
OSD
Controller with 3rd Party DVR
(-)10℃ ~ (+)50℃
Operating Temperature
Operating Humidity 95% RH max
Standard CE, FCC
Power Consumption 12VDC ± 10%, 360mA
• Do not expose the camera to If exposed to radioactivity the Image Sensor
radioactivity. will fail.
Ignoring this information may result
in material loss and/or serious
personal injuries including death.
Ignoring this information may
result in material loss and/or a
slight injuries.
N
OTE
• Exposure to a spotlight or an object emitting strong light may cause smear or blooming.
• Ensure that the power source complies with normal specifications before supplying it to
the camera.
• Power supply (Adaptor : DC12V).
- To avoid fire or shock hazard, must use a UL listed power supply.
• Monitor Impedance.
- Set the impedance switch to 75 ohm standard position.
- When monitor is set to high impedance mode, the picture becomes blurred.
In this case, just check the position of the monitor impedance switch.
Caution
Installation Circumstance
USER INFORMATION
CAUTION
PAL
15,625KHz(H)
50.00Hz(V)
1020(H) x 596(V)
976(H) x 582(V)
RISK OF ELECTRIC SHOCK, DO NOT OPEN NO USER-SERVICEABLE PARTS INSIDE.
THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSISTING OF A
1/50sec.~1/100000sec.(50Hz)
RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT.
THIS EXCLAMATION POINT SYMBOL IS INTENDED TO ALERT THE USER TO
THE PRESENCE OF IMPORTANT OPERATING AND MAINTENANCE (SERVIC-
ING) INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE APPLIANCE.
CODE DESCRIPTION
DAY / NIGHT FILTER & MECHANISM
Indicates "Never Allowed."
WDN
Indicates "No Disas-
sembling."
IR LED
-30

PACKING LIST

CAUTION
REFER FOR SERVICING TO QUALIFIED SERVICE PERSONNEL.
This marking on the product, accessories or literature indicates that the
product and its electronic accessories should not be disposed of with other
household waste at the end of their working life. To prevent possible harm to
the environment or human health from uncontrolled waste disposal, please
separate these items from other types of waste and recycle them responsi-
bly to promote the sustainable reuse of material resources. Household users
should contact either the retailer where they purchased this product, or their
local government office, for details of where and how they can take these
items for environmentally safe recycling. Business users should contact their
supplier and check the terms and conditions of the purchase contract. This
product and its electronic accessories should not be mixed with other com-
mercial wastes for disposal.
WDR
VARIFOCAL VARIFOCAL
DC Auto
LENS
Dual Scan
Iris Lens
DAY / NIGHT
FILTER CHANGE
TRUE DAY / NIGHT (ICR-IR Cut Filter Removable)
UTC POWER SOURCE
IR
LED
MDC-xxx0
UTC Remote Control
Built-in IR LED
- DC 12V
[Option]
Service Monitor Cable
Remote Controller
Manual
UTC Remote
Controller
Opener Key
Mounting Screw
DC 12V