Azden 200R Owner's Manual page 11

(3) The frequency label indicates what frequency (in MHz) the transmitter broadcasts on. The AZDEN
receiver in use must also be on the same frequency.
(4) 3 Position Switch
The bottom position: OFF
The middle position: STANDBY
The top position: ON
In the "STANDBY" position, the audio is muted.
(5) LED indicator
Turns RED when the switch is in "STANDBY" position and GREEN in "ON" position.
NOTE: Remove the battery if the transmitter will not be used for a long period of time.
31LT Lavalier Microphone with body-pack transmitter:
31IT Instrument body-pack transmitter:
(1) Open the battery compartment lid by sliding it down and raising it.
-
+
(10)