Advertisement
Remove
all the parts
from the carton
and lay them out on a smooth,
clean
surface.
Verify the presence
of all
parts
by comparing
to Hardware
and Parts
Lists on previous
pages.
Do not throw
away any of the packaging
until you locate
all the parts.
STEP 1: Attach lid vent asembly
(H)
by inserting
damper
bolt (3)through
lid vent assembly
(H), and lid (A).
Inside of lid, pla.cel fiber washer
(8),
! winged
nut (4) onto damper
bolt (3)
and tigten.
STEP 2: Attach stationary
legs (F) of grill by inserting
a leg bolt (I)
through
metal washer
(9), bottom
bowl (B), leg bowl (K), and screwing
bolt (1) into stationary
leg (F). Repeat procedure
for the other stationary
leg,
Do not fully tighten
until finishing
the grill assembly.
Attach wheel legs (G) of grill by inserting
a leg bolt (1) through
metal washer
(9),
bottom
bowl (B), leg bowl (K), and screwing
bolt (1) into wheel leg (G).
Repeat procedure
tiar the other wheel leg.
Do not fully tighten
until finishing
the grill assembly.
Bottom
Front
of Grill
Customer
Service-1-866-561-0731
Advertisement
