Table of Contents
Advertisement
Factory Reset [aka Vulcan Mind Meld]
Since settings may be changed via FreePlay Connect,
it may be necessary to reset the FreePlay LIVE to its
factory settings.
Please keep in mind that this erases all settings,
including any levels, EQs, etc. that may have been
set. Be sure to power down any amps and/or powered
speakers before resetting FreePlay LIVE.
Simply press and hold the Channel 1 and 2 buttons
simultaneously to reset the FreePlay LIVE to its factory
settings.
If you use the factory default key
combination, you are also wiping the
FreePlay's memory of previously paired
devices. To remedy this, on your smartphone, tablet
or other Bluetooth device, you will need to 'forget
device' in the Bluetooth settings, then re-pair in
order to regain communication and functionality.
AC Power
Be sure FreePlay LIVE is plugged into an outlet that
is able to supply the correct voltage specified for your
model. It will continue to operate at lower voltages, but
will not reach full power.
Be sure the electrical service can supply enough
amperage for all the components connected to it.
We recommend that a stiff (robust) supply of AC
power be used because the amplifiers place high
current demands on the AC line. The more power that
is available on the line, the louder the speakers will
play and the more peak output power will be available
for a cleaner, punchier bass. A suspected problem of
"poor bass performance" is often caused by a weak AC
supply to the amplifiers.
Care and Maintenance
FreePlay LIVE will provide many years of reliable
service if you follow these guidelines:
• Avoid exposing it to moisture. If it's set up
outdoors, be sure it's under cover if rain
is expected.
• Avoid exposure to extreme cold (below freezing
temperatures). If you must operate FreePlay LIVE
in a cold environment warm up the voice coils
slowly by sending a low-level signal through
them for about 15 minutes prior to high-power
operation.
• Use a dry cloth to clean FreePlay LIVE. Only do
this when the power is turned off. Avoid getting
moisture into any of the openings.
11
Owner's Manual
Hide quick links:
Advertisement
Table of Contents
