Connecting Power - Optimus LAB-1100 Owner's Manual

42-2023.fm Page 6 Wednesday, August 11, 1999 2:50 PM
3. Place the rubber mat, ridged side
down, on top of the platter.
illustration

CONNECTING POWER

Once you have connected the turntable
to your receiver/amplifier, plug the turn-
table's power cord into a switched or un-
switched AC outlet on your receiver/
amplifier or into a standard AC outlet.
illustration
Caution: To prevent electric shock, the
plug's blades are polarized and fit only
one way. If the plug does not fit easily,
turn it over and try again. Do not force
the plug into the AC outlet.
6