Panasonic KX-HNC600 Installation Manual page 25

Replacing sensor range caps
1
Remove the attached standard cap.
2
Remove the desired sensor range cap from one of the 4 types (A) and attach it to the
sensor (B).
R When attaching, rotate the tab (
according to the type of cap or direction, and attach the cap on the camera, shown in the
following illustration.
2
For assistance, please visit http://shop.panasonic.com/support
HNC600_(en_en)_0123_ver.201.pdf
1
) on the cap toward the top or at a 45-degree angle
1 1
25
Appendix
25
2017/01/26 9:24:43